GHOST CONTROLS Genuine Accessories

An automatic gate opener system is designed so that you can customize the capabilities of your installation with a complete line of accessories.  If you are unsure of the options available, please click here for an interactive kit builder. A complete line of GHOST CONTROLS® accessories are available including: 

 

The GHOST CONTROLS® AXP1 5 Button Premium Remote Transmitter is a long-range remote control that utilizes ZombieCode™ to securely open and close two different gates. This is the only remote transmitter on the market that can:

  • Enable/Disable PartyMode®
  • Provide battery diagnostics for your system battery
  • Be quickly added as an additional remote into an existing system without requiring you to open the main system control box

The GHOST CONTROLS® AXS1 3 Button Standard Remote Transmitter provides convenient and long range operation of your system by securely communicating through ZombieCode to conveniently trigger opening and closing of two different gates.

 

AXWK Premium Wireless Keypad

GHOST CONTROLS® Premium Wireless Keypads allow access to your property when a secure access code is entered. These keypads also allow specific features and functionality to be enabled such as PartyMode®, 1Key™PartyMode Secure™, and VacationMode™.

AXGN Outdoor Mounting Pedestal

A simple and convenient solution for adding a Wireless Keypad or Water Resistant Remote to any post or column. This bracket is powder-coated aluminum and allows added convenience for access to a keypad from any vehicle.

AXDP 10-Watt Solar Panel

Our systems are designed to operate with Solar Panels providing the primary recharging capabilities for the batteries. These GHOST CONTROLS® high-quality monocrystalline solar panels are available in 10W panels that include an installation bracket.

AXZL ZombieLock Automatic Gate Lock

The patented GHOST CONTROLS® ZombieLock® safely secures your property by locking your gate into the closed position. The intelligent controller will disable and confirm the lock has disengaged before allowing the gate operator to begin opening the gate which will prevent damage to your gate or opener if the operator tried to move the gate while a lock remains totally or partially locked.

AXXV Wired Vehicle Sensor

For the most convenient method of exiting your property, a wired GHOST CONTROLS® Vehicle Sensor will detect a moving vehicle in close proximity and send a signal to your system automatically opening your gate, allowing the vehicle to exit. Especially handy in areas that are prone to extreme weather conditions, such as rain, snow and extreme temperatures.

AXTB Universal Tube Gate Brackets

The GHOST CONTROLS® Universal Tube Bracket Kit is an ideal solution for easily mounting your gate opener front mount, AXZL ZombieLock®, or a variety of other things to a tubular or chain link gate or fence.  These custom steel brackets easily attach with the included fasteners to tube gates with outside diameters of 1-5/8″ to 2″.

ABBT & ABBT-2 Battery Box Kit

The GHOST CONTROLS® ABBT Battery Box Kit is a convenient and attractive solution for your 12V battery storage. This kit is designed to easily mount on the same post as your gate opener system control box so that you do not need to purchase an automotive style battery and box. Because this kit is mounted above the ground on a post or column, this is also an ideal solution for locations where standing water may be present during heavy rains.

AXBT 12-Volt 7 Amp Hour Sealed Battery

All GHOST CONTROLS®Automatic Gate Opener Systems utilize one or more 12V batteries as the primary power source. These sealed lead-acid 12V 7.0 Amp Hr batteries are the only genuine accessories available for our systems and are designed to fit inside of our ABBT Batter Box Kit when automative batteries are not utilized in your system.

AXLV Low Voltage Wire 100, 500, 1000 foot rolls

The Ghost Controls AXLV is 100 feet of Low Voltage Wire that can be used to connect the AXPB Push-Button, extend the AXDP Solar Panel, or connect the AC Transformer. This direct burial, stranded, marked two-conductor wire is an ideal solution for all of your automatic gate opener wired connections.

AXPB Pushbutton-WC

AXPB Wired Non-Illuminated Pushbutton

The Ghost Controls AXPB Push-Button is a simple solution to open or close your gate with the simple press of a button. This non-illuminated button does not draw any power when not in use and can be connected with the AXLV Low Voltage wire in just a few minutes.

AXPO Push-To-Open Brackets-WC

AXPO Push-To-Open Bracket Kit

The Push To Open Adapter Bracket Kit includes two pivot brackets for the rear mount to use when installing a GHOST CONTROLS gate opener system on a push-to-open application.

Push-to-open applications are less commonly installed and require this additional hardware for proper clearance of the operator.

AXLC Locking Clevis Pin

This locking solid-steel Clevis Pin is designed to replace the standard clevis pin included in all Ghost Controls Automatic Gate Opener Kits.  This locking pin allows any padlock with a shank up to 8mm in diameter to be used to secure your automatic gate opener to the rear post mount.  This is the same pin that is included in the AX2L and AX3L Security Kits.

 

 

AX3L 3 Lock Security Kit

The GHOST CONTROLS® Operator Lock Kit provides a replacement rear-mount pin and three padlocks that can be used to lock the operator(s), control box, and/or battery box.

AX2L 3 Lock Security Kit

The GHOST CONTROLS® Operator Lock Kit provides a replacement rear-mount pin and two padlocks that can be used to lock the operator(s), control box, and/or battery box.

AXPE Photo Eyes-WC

AXPS Standard Photo Eyes

While most GHOST CONTROLS® automatic gate opener installations utilize SafeForce® leading-edge technology for entrapment protection, some customers choose to install additional devices with their system. Standard Photo Eyes can be added in pairs to add an additional level of entrapment protection

AXPE Photo Eyes-WC

AXPE Monitored Photo Eyes

While most GHOST CONTROLS® automatic gate opener installations utilize SafeForce® leading-edge technology for entrapment protection, some customers choose to install additional devices with their system. If you enabled Monitored Safety mode on your Ghost Controls opener system, these are the only photo eyes that will allow your system to work.  

You must install two pairs of eyes for a single opener and three pairs of eyes for a dual opener to provide the correct entrapment protection in Monitored Safety mode.