5 Beep Error Code
The Automatic Gate Opener System 5 Beep Error Code is 5 beeps - pause - 5 beeps - pause - etc.
This error code is indicative of a loose connection at the 1st operator terminal. The control board is no longer recognizing the 1st operator control arm.
* Note: splicing the control arm power cable can/will over time cause this issue therefore we do not recommend any splices on the operator arm power cables.
Step 1: Turn the system off and remove the 1st operator arm wires from the control board.
Step 2: Inspect and reinsert the red, black, green and white wires into the 1st operator arm terminal. Turn the system back on and test.
If the issue is still present, contact the technical support department.
Click the image below to download PDF.